TSC 6 Self-clinching Studs

TSC 6 SELF-CLINCHING STUDS
INSTALL THE CLINCHING PART - TSC6
TORQUE TO TURN TESTING - TSC6
PUSH-OUT TESTING - TSC6
INSTALLATION ANIMATION

ADVANTAGES OF CLINCHINGPARTS :

STEEL, STAINLESS STEEL


ADVANTAGES OF CLINCHINGPARTS :

1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

5.NO RETAPPING NECESSARY AFTER APPLICATION.

6.LOW INSTALLED COSTS.

STUDS:

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

Please scroll left and right for table browsing.

TSC  6- DIMENSIONS & SPECIFICATIONS
(MM)
THREAD SIZEP/N.L
LENGTH
±0.40
D ±0.40
+0.08
-0.00
MAX. REC. NUT TIGHT. TORQUE N.m
MIN

MIN
M2.5X0.4525456810121518       4.12.50.405.41.0
M3X0.53506810121518202225    4.63.20.725.61.0
M3.5X0.635668101215182022252830  5.33.51.106.41.0
M4X0.74706810121518202225283035385.94.01.607.21.0
M5X0.8580 810121518202225283035386.55.03.407.21.0
M6X1.0610  10121518202225283035388.26.05.707.91.6
M8X1.258125   121518202225283035389.68.014.009.62.4

Please scroll left and right for table browsing.

TSC 6 - DIMENSIONS & SPECIFICATIONS
( INCH )
THREAD SIZEP/N.L
LENGTH
±0.015
D ± 0.015
+0.003
-0.000
MAX. REC. NUT TIGHT. TORQUE IN.-LBS
MIN

MIN
#2-562560.2500.31250.3750.5000.6250.750    0.1440.0852.50.1870.040
#4-404400.2500.31250.3750.5000.6250.7500.8751.00  0.1760.11150.2190.040
#6-326320.2500.31250.3750.5000.6250.7500.8751.001.251.500.2060.137100.2500.040
#8-328320.2500.31250.3750.5000.6250.7500.8751.001.251.500.2370.163150.2810.040