HOME > Products > Self Tapping Threaded InsertInstallation

Self Tapping Threaded InsertInstallation

  • Self Tapping Threaded InsertInstallation
Product image
  • Product Information

    SELF TAPPING THREADED INSERT
    MANUAL INSTALLATION TOOLS

    self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw
    I. HOLE SIZE:
    RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

    II. HOLE DEPTH:
    IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

    III. COUNTERSINK
    A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

    IV. WALL THICKNESS
    WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

    OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST


    SELF TAPPING THREAD INSERTS - MANUAL INSTALLATION TOOLS

     

  • PRODUCT Q&A

    • NAME
    • E-mail
    • COMMENTS
    • Verification code
PREV
PAGE TOP